selcuksportstaraftarium

ExLight 64 bit Linux with Enlightenment 0.20, kernel 4.13.0-16-exton and Refracta Tools (create your own Ubuntu live installable system)

NEWS 180217 ABOUT ExLight
I’ve made a new extra version of ExLight, which also have the Budgie Desktop 10.4 pre-installed. SourceForge.net is down (or having problems) at the moment. You can now log in to Enlightenment 0.22.1 on all kind of computers, (which you couldn’t before).  Budgie is focused on simplicity and elegance. Designed with the modern user in mind. ExLight Build 180217 with Enlightenment and Budgie Desktop can be downloaded from the Swedish Linux Society. See a screenshot of ExLight running the Budgie Desktop. This new version of ExLight is based on Debian unstable/experimental. I.e. cutting edge software is used. Build 180217 is a total rebuild of ExLight. The ISO file size has decreased from 1560 MB to 986 MB, which means that ExLight now can run even faster from RAM.

WHAT’S NEW IN VERSION 171112?
NOTE: Version 171112 replaces version 170105.
1. ExLight is now based on Ubuntu 17.10 (alias Artful Aardvark) and Debian Buster/Stretch.
2. I have upgraded the Desktop environment Enlightenment (Beauty at your fingertips) to version 0.20.99.0 (from 0.19.12).
3. I have replaced kernel 4.9.0-11-exton with my special kernel 4.13.0-16-exton corresponding Kernel.org’s stable kernel 4.13.4.
4. ExLight’s ISO file is now a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can then even run ExLight from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
5. Another big improvement is that ExLight can run from RAM. Use Boot alternative 4 (load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExLight that way.
6. The installation program Ubiquity (Ubuntu’s live installer) has been replaced with Refracta Installer. Very simple to use! A new user (your user) will be created during the installation process. The reason for the replacement is that Ubiquity is a bit too complicated and that the program crashes once in a while.
7. I have installed Nvidia’s proprietary graphics driver 384.98.
8. I have added seven animated wallpapers.
9. MOST IMPORTANT: I’ve added Refracta Snapshot, which make it possible for you to create your own live installable Ubuntu system. I mean change everything to your liking, fire up Refracta Snapshot and wait 3 – 5 min until your new ISO is ready!

What’s new in kernel 4.13?

enlightenment-logoInstalled packages
The Desktop Environment is Enlightenment 0.20.99.0 (Beauty at your fingertips). Kernel 4.13.0-16-exton is used. (Kernel.org‘s stable kernel 4.13.4). Program content: Refracta Tools, Libre Office, Synaptic, GParted, SMPlayer (an alternative to Vlc), Wicd, PCManFM, Firefox (for watching Netflix movies etc.) and Gimp. Furthermore compilation tools so that you can install programs from source. I have also included Nvidia’s proprietary graphics driver 384.98. It has support for the following GPUs (among others): Quadro M3000 SE, GeForce 10, GeForce 900, GeForce 800A, GeForce 800M, GeForce 700, Quadro Series, GeForce GTX 970M and GeForce GTX 980M. Study the full ExLight program LIST. All packages have been updated to the latest available version as at November 12, 2017.

The system language is English.

Login to Enlightenment
When you start up from a DVD disc or a USB stick you will end up in Enlightenment logged in as the ordinary user exlight. You can log out to Slim‘s login screen and log in again as root if you want. The password for exlight is exlight. The password for root (superuser) is root. NOTE: It can happen that you – after the boot process is over – end up in console mode on certain computers. Then just log in as exlight or root and run the command startx. You will then (hopefully) enter the Enlightenment Desktop.

Using the Nvidia proprietary driver
If you want (and can) use Nvidia’s proprietary graphics driver 384.98 you shall boot up ExLight using boot alternative 3 (Nomodeset). Then open up a terminal and run sudo nvidia-xconfig. Log out. If you can’t reach X/Enlightenment then your card isn’t supported. Delete xorg.conf with sudo rm /etc/X11/xorg.conf and run the command startx. Or reboot your computer. After a hard drive installation of ExLight the open source driver Nouveau will be used, since it’s “built in” in the kernel. If you want and can use Nvidia’s proprietary graphics driver 384.98 you’ll have to run the command sudo nvidia-xconfig and restart your computer. You’ll also have to change /boot/grub/grub.cfg as this example shows.
menuentry ‘ExLight :: GRUB :: (sda8)’ –class ubuntu –class gnu-linux –class gnu –class os $menuentry_id_option ‘gnulinux-simple-e150990b-5ae8-4f35-8d71-8118e682b5c7’ {
insmod gzio
insmod part_gpt
insmod ext2
set root=’hd0,gpt8′
if [ x$feature_platform_search_hint = xy ]; then
search –no-floppy –fs-uuid –set=root –hint-bios=hd0,gpt8 –hint-efi=hd0,gpt8 –hint-baremetal=ahci0,gpt8 e150990b-5ae8-4f35-8d71-8118e682b5c7
else
search –no-floppy –fs-uuid –set=root e150990b-5ae8-4f35-8d71-8118e682b5c7
fi
linux /boot/vmlinuz-4.13.0-16-exton root=UUID=e150990b-5ae8-4f35-8d71-8118e682b5c7 rw nomodeset
initrd /boot/initrd.img-4.13.0-16-exton
}

Wireless connections
In version 171112 I have replaced NetworkManager with Wicd to make it easier to configure wireless connections. Now just start up Wicd-client. Give your WEP/WAP password and connect. That’s it! Maybe you will have to change your network interfaces (eth0, wlan0) to for example eth1 and wlan1 in Wicd’s Preferences and click on the button Refresh before you can connect. Check your interfaces with the command sudo iwconfig.

IMPORTANT ABOUT REFRACTA TOOLS
Refracta tools are pre-installed in ExLight Build 171112. Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 17.10 Live DVD once you have installed ExLight to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Menu >> System >> Refracta Snapshot. You don’t even have to install ExLight to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running ExLight from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 5 – 20 min! You’ll find the ISO in /home/snapshots. The whole thing is very simple. Refracta Installer replaces Ubiquity (Ubuntu’s installer). Refracta Installer is also very simple to use. No “expert knowledge” is needed.

Installation to hard drive
Note that you in advance (just in case) should create a partition of at least 20 GB (if you want to use Refracta Snapshot) for ExLight and a SWAP space double the size of your computer’s RAM. I.e. if you have RAM of 1024 MB or less. If you have RAM of 2 GB or more it’s enough with a SWAP space of 2 GB. The installation program in ExLight /Ubuntu is otherwise “intuitive”. Choose Expert Installation and select the partition you created in advance for installation.
You’ll find the installation program under Menu >> System >> Refracta Installer. The installation to hard drive is now so simple that a 10 year old child can do it. NOTE 1: You should format your intended installation partition in advance. You can use GParted for that. NOTE 2: When the installation is ready (in about 5 min) you must mount your installation partition and edit /boot/grub/grub.cfg. Change ro to rw on the kernel line. Example: sudo mkdir /mnt/sda5 followed by sudo mount /dev/sda5 /mnt/sda5. Watch this screenshot.

USB installation
Read my INSTRUCTION.

Create new users
Run the command sudo adduser NewUser.

Sound
Use Alsamixer (command: alsamixer) for sound settings. It can look like this. Also: Unmute with the round sound button in the bottom panel.

How do I install and remove programs?
ExLight/Ubuntu/Debian uses Apt/Synaptic. The most important commands are apt-get update and apt-get install program-name. You can read about package management with Apt HERE. Apt/Synaptic works extremely well. You can also install programs in ExLight from source using the commands 1) ./configure –prefix=/usr 2) make 3) make install.

VirtualBox and VMware
ExLight runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 3 (nomodeset).

Printing using Cups
It’s really very simple to install a printer in ExLight/Ubuntu. Cups (Common UNIX Printing System) is pre-installed in ExLight Build 171112. Just open up Firefox and go to http://localhost:631/admin. See a screenshot when I have added my HP Printer in ExLight.

How to change Enlightenment themes
If you want to change the standard Enlightenment 0.20 theme to for example a theme called blingbling you can very easy install it in Exlight after a hard drive installation of Exlight or even while running ExLight live (from DVD or USB). Watch this screenshot. NOTE: In ExLight Build 171112 the blingbling theme is already used.

Spotify
You may want to install Spotify in ExLight. Just go ahead. It’s very easy. Follow this instruction for Ubuntu. When running ExLight Build 180215 and 171112 live or from hard drive you can just install Spotify with the command sudo apt update followed by sudo apt install spotify-client.

Some cool things to do in ExLight Linux…

Screenshots
ExLight – running Refracta Snapshot
ExLight running in VirtualBox
ExLight running Spotify
ExLight running Samba
ExLight running in VMware

This version of ExLight has been replaced by Build 190202…

Read about my Android-x86 Systems – Oreo, Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Oreo 8.1!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!

 

ExLight 64 bit Linux with Enlightenment 0.20, kernel 4.9.0-11-exton and Refracta Tools (create your own Ubuntu system)

exlight-theme-screenshot-smallWHAT’S NEW IN VERSION 170105?
NOTE: Version 170105 replaces version 161016.

1. ExLight is now based on Ubuntu 16.10 (alias Yakkety Yak) and Debian Jessie/Stretch.
2. I have upgraded the Desktop environment Enlightenment (Beauty at your fingertips) to version 0.20.99.0 (from 0.19.12).
3. I have replaced kernel 4.8.0-21-exton with my special kernel 4.9.0-11-exton corresponding Kernel.org’s stable kernel 4.9. If you want to use “my” kernel in another Ubuntu/Debian system you can download it.
4. ExLight’s ISO file is now a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can then even run ExLight from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
5. Another big improvement is that ExLight can run from RAM. Use Boot alternative 4 (load to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExLight that way.
6. The installation program Ubiquity (Ubuntu’s live installer) has been replaced with Refracta Installer. Very simple to use! A new user (your user) will be created during the installation process. The reason for the replacement is that Ubiquity is a bit too complicated and that the program crashes once in a while.
7. I have installed Nvidia’s proprietary graphics driver 375.26.
8. I have added seven animated wallpapers.
9. MOST IMPORTANT: I’ve added Refracta Snapshot, which make it possible for you to create your own live installable Ubuntu system. I mean change everything to your liking, fire up Refracta Snapshot and wait 3 – 5 min until your new ISO is ready!

What’s new in kernel 4.9?

enlightenment-logoInstalled packages
The Desktop Environment is Enlightenment 0.20.99.0 (Beauty at your fingertips). Kernel 4.9.0-11-exton is used. (Kernel.org‘s stable kernel 4.9). Program content: Refracta Tools, Libre Office, Synaptic, GParted, SMPlayer (an alternative to Vlc), Wicd, PCManFM, Google Chrome (for watching Netflix movies) and Gimp. Furthermore compilation tools so that you can install programs from source. I have also included Nvidia’s proprietary graphics driver 375.26. It has support for the following GPUs (among others): Quadro M3000 SE, GeForce 10, GeForce 900, GeForce 800A, GeForce 800M, GeForce 700, Quadro Series, GeForce GTX 970M and GeForce GTX 980M. Study the full ExLight program LIST. All packages have been updated to the latest available version as at January 5, 2017.

The system language is English.

Login to Enlightenment
When you start up from a dvd disc or a USB stick you will end up in Enlightenment logged in as the ordinary user exlight. You can log out to Slim‘s login screen and log in again as root if you want. The password for exlight is exlight. The password for root (superuser) is root. NOTE: It can happen that you – after the boot process is over – end up in console mode on certain computers. Then just log in as exlight or root and run the command startx. You will then (hopefully) enter the Enlightenment Desktop.

Using the Nvidia proprietary driver
If you want (and can) use Nvidia’s proprietary graphics driver 375.26 you shall boot up ExLight using boot alternative 3 (Nomodeset). Then open up a terminal and run sudo nvidia-xconfig. Log out. If you can’t reach X/Enlightenment then your card isn’t supported. Delete xorg.conf with sudo rm /etc/X11/xorg.conf and run the command startx. Or reboot your computer. After a hard drive installation of ExLight the open source driver Nouveau will be used, since it’s “built in” in the kernel. If you want and can use Nvidia’s proprietary graphics driver 375.26 you’ll have to run the command sudo nvidia-xconfig and restart your computer. You’ll also have to change /boot/grub/grub.cfg as this example shows.
menuentry ‘ExLight :: GRUB :: (sda8)’ –class ubuntu –class gnu-linux –class gnu –class os $menuentry_id_option ‘gnulinux-simple-e150990b-5ae8-4f35-8d71-8118e682b5c7’ {
insmod gzio
insmod part_gpt
insmod ext2
set root=’hd0,gpt8′
if [ x$feature_platform_search_hint = xy ]; then
search –no-floppy –fs-uuid –set=root –hint-bios=hd0,gpt8 –hint-efi=hd0,gpt8 –hint-baremetal=ahci0,gpt8 e150990b-5ae8-4f35-8d71-8118e682b5c7
else
search –no-floppy –fs-uuid –set=root e150990b-5ae8-4f35-8d71-8118e682b5c7
fi
linux /boot/vmlinuz-4.9.0-11-exton root=UUID=e150990b-5ae8-4f35-8d71-8118e682b5c7 rw nomodeset
initrd /boot/initrd.img-4.9.0-11-exton
}

Wireless connections
In version 170105 I have replaced NetworkManager with Wicd to make it easier to configure wireless connections. Now just start up Wicd-client. Give your WEP/WAP password and connect. That’s it! Maybe you will have to change your network interfaces (eth0, wlan0) to for example eth1 and wlan1 in Wicd’s Preferences and click on the button Refresh before you can connect. Check your interfaces with the command sudo iwconfig.

IMPORTANT ABOUT REFRACTA TOOLS
Refracta tools are pre-installed in ExLight Build 170105. Use them to create your own live installable Ubuntu system. I mean create your own installable Ubuntu 16.10 Live DVD once you have installed ExLight to hard drive. I mean change everything and then create a whole new Ubuntu live system. Start Refracta from Menu >> System >> Refracta Snapshot. You don’t even have to install ExLight to hard drive before you can use the Refracta tools. If you have plenty of RAM you can create a new (your own!) Ubuntu system while running ExLight from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) will only take 5 – 10 min!  You’ll find the ISO in /home/snapshots. The whole thing is very simple. Refracta Installer replaces Ubiquity (Ubuntu’s installer). Refracta Installer is also very simple to use. No “expert knowledge” is needed.

Installation to hard drive
Note that you in advance (just in case) should create a partition of at least 20 GB (if you want to use Refracta Snapshot) for ExLight and a SWAP space double the size of your computer’s RAM. I.e. if you have RAM of 1024 MB or less. If you have RAM of 2 GB or more it’s enough with a SWAP space of 2 GB. The installation program in ExLight /Ubuntu is otherwise “intuitive”. Choose Expert Installation and select the partition you created in advance for installation.
You’ll find the installation program under Menu >> System >> Refracta Installer. The installation to hard drive is now so simple that a 10 year old child can do it. NOTE 1: You should format your intended installation partition in advance. You can use GParted for that. NOTE 2: If you want to install Grub as bootloader while installing ExLight on a UEFI-enabled computer you’ll have to replace grub-pc with grub-efi-amd64. Just run the command sudo apt-get update followed by sudo apt-get install grub-efi-amd64 before you start the install program Refracta Installer. NOTE 3: When the installation is ready (in about 5 min) you must mount your installation partition and edit /boot/grub/grub.cfg. Change ro to rw on the kernel line. Example: sudo mkdir /mnt/sda5 followed by sudo mount /dev/sda5 /mnt/sda5. Watch this screenshot.

USB installation
Read my INSTRUCTION.

Create new users
Run the command sudo adduser NewUser.

Sound
Use Alsamixer (command: alsamixer) for sound settings. It can look like this. Also: Unmute with the round sound button in the bottom panel.

How do I install and remove programs?
ExLight/Ubuntu/Debian uses Apt/Synaptic. The most important commands are apt-get update and apt-get install program-name. You can read about package management with Apt HERE. Apt/Synaptic works extremely well. You can also install programs in ExLight from source using the commands 1) ./configure –prefix=/usr 2) make 3) make install.

VirtualBox and VMware
ExLight runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 3 (nomodeset).

Printing using Cups
It’s really very simple to install a printer in ExLight/Ubuntu. Cups (Common UNIX Printing System) is pre-installed in ExLight Build 170105. Just open up Google Chrome and go to http://localhost:631/admin. See a screenshot when I have added my HP Printer in ExLight.

How to change Enlightenment themes
If you want to change the standard Enlightenment 0.20 theme to for example a theme called blingbling you can very easy install it in Exlight after a hard drive installation of Exlight or even while running ExLight live (from DVD or USB). Watch this screenshot. NOTE: In ExLight Build 170105 the blingbling theme is already used.

Spotify
You may want to install Spotify in ExLight. Just go ahead. It’s very easy. Follow this instruction for Ubuntu. When running ExLight Build 170105 live or from hard drive you can just install Spotify with the command sudo apt update followed by sudo apt install spotify-client.

Some cool things to do in ExLight Linux…

Screenshots
ExLight – running Refracta Snapshot
ExLight running Google Chrome with Netflix
ExLight running Spotify
ExLight running Samba
ExLight running in VMware

exlight-logo-blue-textDOWNLOAD
This version has been replaced by version 171112

 Read about my Android-x86 Systems – Nougat, Marshmallow, Lollipop and KitKat at

andex.exton.net – latest is AndEX Nougat!

and about my Nougat, Marshmallow and Lollipop versions for Raspberry Pi 3/2 at
raspex.exton.se – latest is RaspAnd Nougat!

 

ExLight Live DVD – based on Ubuntu 16.10 – with Enlightenment 0.20 and kernel 4.8.0-21-exton

exlight-theme-screenshot-smallWHAT’S NEW IN VERSION 161016?
NOTE: Version 161016 replaces version 160810.

1. ExLight is now based on Ubuntu 16.10 (alias Yakkety Yak) and Debian 8.6 Jessie.
2. I have upgraded the Desktop environment Enlightenment (Beauty at your fingertips) to version 0.20.99.0 (from 0.19.12).
3. I have replaced kernel 4.6.0-10-exlight with my special kernel 4.8.0-21-exton corresponding Kernel.org’s stable kernel 4.8. If you want to use “my” kernel in another Ubuntu/Debian system you can download it.
4. ExLight’s ISO file is now a ISO-hybrid, which means that it can very easily be transferred (copied) to a USB pen drive. You can then even run ExLight from the USB stick and save all your system changes on the stick. I.e. you will enjoy persistence!
5. Another big improvement is that ExLight can run from RAM. Use Boot alternative 3 (Copy to RAM). When the system has booted up you can remove the disc (DVD) or USB stick. You’ll need at least 2 GB RAM to run ExLight that way.
6. The installation program Ubiquity (live installer) is now working as intended in ExLight version 161016. I.e. a new user (your user) will be created during the installation process.
7. I have installed Nvidia’s proprietary graphics driver 370.28.
8. I have added seven animated wallpapers.

What’s new in kernel 4.8?

enlightenment-logoInstalled packages
The Desktop Environment is Enlightenment 0.20.99.0 (Beauty at your fingertips). Kernel 4.8.0-21-exton is used. (Kernel.org‘s stable kernel 4.8). Program content: Libre Office, Synaptic, GParted, SMPlayer (an alternative to Vlc), Wicd, PCManFM, Google Chrome (for watching Netflix movies) and Gimp. Furthermore compilation tools so that you can install programs from source. I have also included Nvidia’s proprietary graphics driver 370.28. It has support for the following GPUs (among others): GeForce 10, GeForce 900, GeForce 800A, GeForce 800M, GeForce 700, Quadro Series, GeForce GTX 970M and GeForce GTX 980M. Study the full ExLight program LIST. All programs have been updated to the latest available version as at October 16, 2016.

The system language is English.

Login to Enlightenment
When you start up from the dvd or USB stick you will end up at Slim‘s login screen. Log in to Enlightenment as the ordinary user exlight or as root. The user exlight has no password. The password for root (superuser) is root.

Using the Nvidia driver
If you want (and can) use Nvidia’s proprietary graphics driver 370.28 you shall boot up ExLight using boot alternative 4 (Compatibility mode). Then open up a terminal and run sudo nvidia-xconfig. Log out. If you can’t reach X/Enlightenment then your card isn’t supported. Delete xorg.conf with sudo rm /etc/X11/xorg.conf and run the command startx. Or reboot your computer. NOTE: Normally you don’t have to do as I just stated. I.e. your Nvidia card will be recognized and used automatically (even if you use boot alternative 1 or 3).

Wireless connections
In version 161016 I have replaced NetworkManager with Wicd to make it easier to configure wireless connections. Now just start up Wicd-client. Give your WEP/WAP password and connect. That’s it! Maybe you will have to change your network interfaces (eth0, wlan0) to for example eth1 and wlan1 in Wicd’s Preferences and click on the button Refresh before you can connect.

Installation to hard drive
Note that you in advance (just in case) should create a partition of at least 10 GB for ExLight and a SWAP space double the size of your computer’s RAM. I.e. if you have RAM of 1024 MB or less. If you have RAM of 2 GB or more it’s enough with a SWAP space of 2 GB. The installation program in ExLight /Ubuntu is otherwise “intuitive”. Choose manual partitioning and select the partition you created in advance for installation.
NOTE re. ExLight Build 161016: If you want to add respositories with a command (for example: sudo apt-add-repository ppa:kubuntu-ppa/backports) you’ll have change the first line in /etc/lsb-release to “DISTRIB_ID=Ubuntu.

USB installation
Read my INSTRUCTION.

Changing the root password
If you install ExLight to hard drive you must/should immediately (for security reasons) manually change root’s password. This is because the installation program does not ask about a new root password. (Ubuntu original uses no root password). The root password is changed by running the command sudo passwd root. After installing ExLight to hard drive, you can alternatively remove the root password altogether. This is done with the command sudo passwd root -l.

Create new users
Run the command sudo adduser NewUser.

Sound
Use Alsamixer (command: alsamixer) for sound settings. It can look like this. Also: Unmute with the round sound button in the bottom panel.

How do I install and remove programs?
ExLight/Ubuntu/Debian uses Apt/Synaptic. The most important commands are apt-get update and apt-get install program-name. You can read about package management with Apt HERE. Apt/Synaptic works extremely well. You can also install programs in ExLight from source using the commands 1) ./configure –prefix=/usr 2) make 3) make install.

Printing using Cups
It’s really very simple to install a printer in ExLight/Ubuntu. Cups (Common UNIX Printing System) is pre-installed in ExLight Build 161016. Just open up Google Chrome and go to http://localhost:631/admin. See a screenshot when I have added my HP Printer in ExLight.

How to change Enlightenment themes
If you want to change the standard Enlightenment 0.20 theme to for example a theme called blingbling you can very easy install it in Exlight after a hard drive installation of Exlight or even while running ExLight live (from DVD or USB). Watch this screenshot. NOTE: When logged in as root the blingbling theme is already used.

Some cool things to do in ExLight Linux…

Screenshots
ExLight – how to change Enlightenment theme
ExLight running Google Chrome with Netflix
ExLight running Spotify

exlight-logo-blue-textDOWNLOAD
ExLight Linux Live DVD can be downloaded from SourceForge.netFast, secure and free downloads from the largest Open Source applications and software directory.

md5sum for ExLight ISO which is of 1480 MB.

 

Some cool things to do in ExLight Linux

enlightenment-logoYou can do many things in ExLight. As a matter of fact you can do anything you can do in a “ordinary” Ubuntu/Debian system, but I suggest that you start doing this.

exlight-desktop-netflix-160810-small
A.
Watch Netflix movies in Google Chrome. You can do it as the ordinary user exlight or as root.

 

 

 

exlight-spotify-small

B. Listen to your favourite music in Spotify. Install Spotify by running the command sudo apt-get install spotify-client. You can of course do it while running ExLight live (from DVD or a USB stick).

 

 

 

exlight-animated-wallpapers-small
C.
Choose a real cool animated wallpaper. I have pre-installed seven very different animated wallpapers in ExLight.

 

 

 

 

exlight-running-refracta-small
D.
In ExLight Build 170105 I’ve added Refracta Snapshot, which make it possible for you to create your own live installable Ubuntu system. I mean change everything to your liking, fire up Refracta Snapshot and wait 3 – 5 min until your new ISO is ready!

exlight-logo-blue-text

 

Run a real fast Linux Live system!