Tag Archives: Debian Sid

exton, Exton Linux Distributions

ExLight 64bit UEFI, Build 231005, based on Debian “Sid/Trixie” (unstable/testing) with Enlightenment 0.25.4 (latest) as DE, Refracta Snapshot and Calamares Installer

1 Comment

NEWS 231005 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.25.4 Desktop environment, Refracta Snapshot (create your own Debian Sid/Trixie System) and Calamares 3.3.0~alpha2-1 Installer Framework.

New sources 231005
This new version of ExLight is based on Debian Sid / Trixie (unstable/testing). Build 231005 is a total rebuild of ExLight. The ISO file size is of only 2000 MB, which means that you’ll need about 3GB RAM to run ExLight even faster from RAM. I.e. load to RAM – screenshot. You can remove the DVD or USB stick when ExLight has booted.

KERNEL
ExLight Build 231005 uses kernel 6.5.3-amd64-exton built from Debian kernel sources with Debian patches.

What’s new in kernel 6.5?

Installed packages
Study all installed packages in ExLight Build 231005.

LOGIN PROBLEMS IN BUILD 231005
To be able to login to the Enlightenment 0.25.4 Desktop you’ll have to use a “fairly new” computer. According to my experience the computer can’t be older than about eight (8) years. After a live boot (from a USB stick or a DVD) you are supposed to be logged in automatically as root (superuser) to the Enlightenment Desktop. If not you will end up in console mode logged in as user. For testing purposes you can do the following if you have a wired Internet connection. Run the following commands:
1. sudo apt update
2. sudo apt install lxde
3. nano .xinitrc
4. Change .xinitrc to exec startlxde
5. startx
You will now enter the LXDE Desktop. So the problem is really Enlightenment. I.e. not which Display Manager to use. I’ve tried with LightDM, SLiM and finally LXDM. I’m grateful if somebody find a solution to the problem Enlightenment/login and notify me. I’ve found only one Internet post about the problem (with no solution unfortunately).
CONCLUSION: Use a “fairly new” computer if you want to run Enlightenment 0.25.4 in ExLight. I wrote this as a comment at my SourceForge site 221129:  I tried ExLight Build 220726 on a really old computer – Acer Aspire 5102WLMi from 2006. Running ExLight on that computer I got the same problems as the ones you have described. I.e. I could only log in from console mode. I could never reach the Enlightenment Desktop. I have therefore decided to upload a new version of ExLight with a new kernel (possibly the newest) and upgraded packages. That will probably happen today. If the new version won’t run on my old Aspire I have to say that ExLight only runs on fairly new computers. ExLight Build 231005 has the same problem. I.e. using my old Acer I can’t reach the Enlightenment 0.25.4 Desktop whatever I do. I can run LXDE (and possibly other Desktop Environments) without problem though. Watch this screenshot.

LOGIN and passwords
When you start up from the DVD or USB stick you will end up in Enlightenment logged in as root (superuser) if your computer is “fairly new” – see above. You can log out from root’s Desktop screen and log in as the ordinary user user if you want. Press the keys Ctrl Alt F1 simultaneously. Log in from console as user with password live. Then run the command startx. The password for the ordinary user user is live. The password for root (superuser) is root. NOTE: After a hard drive installation using Calamares the root password will be gone. To fix it log in as user with password live and run the command sudo passwd root.

VirtualBox and VMware
You can’t run ExLight Build 231005 in VirtualBox or VMware for some unknown reason.

WIRELESS connections
In Build 231005 NetworkManager, WPA supplicant and ConnMan are installed. Use the one you prefer.
NOTE1: Study /etc/resolv.conf-WORKING and change it (if necessary) to suit your needs – screenshot. Keep a copy of resolv.conf-WORKING before you change the filename. Watch a screenshot showing how to use NetworkManager.
NOTE2: For WiFi connections you should use NetworkManager logged in as root.
NOTE3: On some computers it can be necessary to unblock WiFi before you can connect. Do it with the command rfkill unblock wifi

Running ExLight live as the ordinary user user
If you for some reason want to run ExLight live as user you shall do this.
1. Logout from Enlightenment
2. Leave X by pressing Ctrl Alt F1 simultaneously
3. Log in as user with password live
4. Enter X/Enlightenment by running the command startx
NOTE: After a hard drive installation you will still be logged in automatically to Enlightenment as root.  Follow steps 1 – 3 above if you want to log in as your created user during the installation process. You can change the auto login configuration by editing /etc/lxdm/lxdm.conf. Watch this screenshot…

MOVIE about Calamares Installer
Watch a movie about the Calamares installation process in VirtualBox. You can use the Calamares Installer Framework to install ExLight to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. (Unfortunately not in this version of ExLight). Watch this animated GIF. (It’s for DebEX Budgie, but works in the same way in ExLight).

Or watch this slideshow.

Spotify
You can easily install Spotify in ExLight (even while running the system live). Just run the command sudo apt update followed by sudo apt install spotify-client.

Important about Refracta
You can use Refracta Snapshot (pre-installed in ExLight) to create your own installable Debian Sid/Trixie Live System once you have installed ExLight to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta Snapshot it will look like this. You don’t even have to install ExLight to hard drive before you can use the Refracta Snapshot. If you have plenty of RAM you can create a new (your own!) Debian system while running ExLight from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) only will take 10 – 50 min! You’ll find the ISO in /home/snapshot. Or change that by editing /etc/refractasnapshot.conf. NOTE: You may have to run Refracta Snapshot in three steps (1 – 3) before your new ISO is ready.

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian Sid. So is ExLight.

KNOWN ISSUES
After a hard drive installation using Calamares Installer (Not Refracta Installer) you’ll have three “problems”.
1. /etc/apt/sources.list will be different. Replace it with the file sources.list-use-after-install
2. The root password will be gone. Fix it by logging in as the ordinary user user and run the command sudo passwd root. Or do it while logged in automatically as root.
3. In order to see all icons in the menu you may have to change icons – watch this screenshot.
4. You can’t login to the Enlightenment 0.25.4 Desktop unless you use a “fairly new” computer – see above.

SCREENSHOTS
1. The Enlightenment 0.25.4 Desktop for user user
2. The Enlightenment 0.25.4 Desktop for root
3. Using NetworkManager for WiFi connections
4. Showing a Samba connection

Watch a YouTube Video about ExLight…

The Video is called “ExLight Linux – Lightest Distro I Have Ever Tried“. (It is not made by me).

exlight-logo-blue-textDOWNLOAD
ExLight Build 231005 Linux Live System can be downloaded from SourceForge.net – Fast, secure and free downloads from the largest Open Source applications and software directory.

You can also download ExLight from the Swedish Linux Society…

md5sum for exlight-64bit-sid-efi-e-0.25.4-refracta-calamares-2000mb-231005.iso

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!


Follow me on Facebook…

exton, Exton Linux Distributions

ExLight 64bit UEFI, Build 221130, based on Debian “Sid” (unstable/development) with Enlightenment 0.25.4 (latest) as DE, Refracta Snapshot and Calamares Installer

Leave a comment

NEWS 221130 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.25.4 Desktop environment, Refracta Snapshot (create your own Debian Sid System) and Calamares 3.2.61-1 Installer Framework. The very nice Enlightenment theme e25 Neonz is used.

New sources 221130
This new version of ExLight is based on Debian Sid (unstable/development). Build 221130 is a total rebuild of ExLight. The ISO file size is of only 1850 MB, which means that you’ll need about 3GB RAM to run ExLight even faster from RAM. I.e. load to RAM – screenshot. You can remove the DVD or USB stick when ExLight has booted.

KERNEL
ExLight Build 221130 uses kernel 6.0.10-amd64-exton-rt14 built from Debian kernel sources with Debian patches.

What’s new in kernel 6.0?

Installed packages
Study all installed packages in ExLight Build 221130.

LOGIN PROBLEMS IN BUILD 221130 (AND BUILD 220726)
To be able to login to the Enlightenment 0.25.4 Desktop you’ll have to use a “fairly new” computer. According to my experience the computer can’t be older than about eight (8) years. After a live boot (from a USB stick or a DVD) you are supposed to be logged in automatically as the ordinary user user. If not you will end up in console mode logged in as user. For testing purposes you can do the following if you have a wired Internet connection. Run the following commands:
1. sudo apt update
2. sudo apt install lxde
3. nano .xinitrc
4. Change .xinitrc to exec startlxde
5. startx
You will now enter the LXDE Desktop. So the problem is really Enlightenment. I.e. not which Display Manager to use. I’ve tried with LightDM, SLiM and finally LXDM. I’m grateful if somebody find a solution to the problem Enlightenment/login and notify me. I’ve found only one Internet post about the problem (with no solution unfortunately).
CONCLUSION: Use a “fairly new” computer if you want to run Enlightenment 0.25.4 in ExLight. I wrote this as a comment at my SourceForge site yesterday (221129):  I tried ExLight Build 220726 on a really old computer – Acer Aspire 5102WLMi from 2006. Running ExLight on that computer I got the same problems as the ones you have described. I.e. I could only log in from console mode. I could never reach the Enlightenment Desktop. I have therefore decided to upload a new version of ExLight with a new kernel (possibly the newest) and upgraded packages. That will probably happen today. If the new version won’t run on my old Aspire I have to say that ExLight only runs on fairly new computers. ExLight Build 221130 has the same problem. I.e. using my old Acer I can’t reach the Enlightenment 0.25.4 Desktop whatever I do. I can run LXDE (and possibly other Desktop Environments) without problem though. Watch this screenshot.

LOGIN and passwords
After booting up ExLight (built with Refracta) from DVD/USB stick you’ll end up in Enlightenment as the ordinary user user. The password for user is live. The password for root is root. After the installation of ExLight to hard disk you’ll get the chance to create your own ordinary user. When logged in as user you can use Sudo to become root. (Command: sudo su). NOTE: After a hard drive installation of ExLight you can still log in to Enlightenment as root, but you’ll have to create a new password for root. That’s done by running the command sudo passwd root (as the ordinary user user).

VirtualBox and VMware
ExLight Build 221130 runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 4 (failsafe). You can use Calamares Installer also in VirtualBox and VMware without any problems. VirtualBox Guest Additions are pre-installed. Watch a screenshot when ExLight is running in full screen in VirtualBox.

WIRELESS connections
In Build 221130 NetworkManager, WPA supplicant and ConnMan are installed. Use the one you prefer.
NOTE1: Study /etc/resolv.conf-WORKING and change it (if necessary) to suit your needs – screenshot. Keep a copy of resolv.conf-WORKING before you change the filename. Watch a screenshot showing how to use NetworkManager. NOTE2: For WiFi connections you should use NetworkManager logged in as root.

Running ExLight live as root
If you for some reason want to run ExLight live as root you shall do this.
1. Logout from Enlightenment
2. Leave X by pressing Ctrl Alt F1 simultaneously
3. Run the command sudo su followed by cd /root
4. Enter X/Enlightenment by running the command startx

MOVIE about Calamares Installer
Watch a movie about the Calamares installation process in VirtualBox. You can use the Calamares Installer Framework to install ExLight to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. Watch this animated GIF. (It’s for DebEX Budgie, but works in the same way in ExLight).

Or watch this slideshow.

Spotify
You can easily install Spotify in ExLight (even while running the system live). Just run the command sudo apt update followed by sudo apt install spotify-client.

Important about Refracta
You can use Refracta Snapshot (pre-installed in ExLight) to create your own installable Debian Sid Live System once you have installed ExLight to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta Snapshot it will look like this. You don’t even have to install ExLight to hard drive before you can use the Refracta Snapshot. If you have plenty of RAM you can create a new (your own!) Debian system while running ExLight from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) only will take 10 – 50 min! You’ll find the ISO in /home/snapshot. Or change that by editing /etc/refractasnapshot.conf. NOTE: You may have to run Refracta Snapshot in three steps (1 – 3) before your new ISO is ready.

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian Sid. So is ExLight.

KNOWN ISSUES
After a hard drive installation using Calamares Installer (Not Refracta Installer) you’ll have three “problems”.
1. /etc/apt/sources.list will be different. Replace it with this file.
2. The root password will be gone. Fix it by logging in as the ordinary user user and run the command sudo passwd root.
3. In order to see all icons in the menu you may have to change icons – watch this screenshot.
4. You can’t login to the Enlightenment 0.25.4 Desktop unless you use a “fairly new” computer – see above.

SCREENSHOTS
1. The Enlightenment 0.25.4 Desktop for user user
2. The Enlightenment 0.25.4 Desktop for root running Refracta Snapshot
3. Running ExLight in full screen in VirtualBox
4. Using NetworkManager for WiFi connections
5. Running ExLight from RAM
6. Refracta Snapshot has started
7. Running Calamares Installer

Watch a YouTube Video about ExLight…

The Video is called “ExLight Linux – Lightest Distro I Have Ever Tried“. (It is not made by me).

exlight-logo-blue-textDOWNLOAD
This ExLight version has been replaced by version 231005…

 

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!
exton, Exton Linux Distributions

ExLight 64bit UEFI, Build 220726, based on Debian “Sid” (unstable/development) with Enlightenment 0.25.3 (latest) as DE, Refracta Snapshot and Calamares Installer

18 Comments

NEWS 220726 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.25.3 Desktop environment, Refracta Snapshot (create your own Debian Sid System) and Calamares 3.2.60-1 Installer Framework. The very nice Enlightenment theme e25 Neonz is used.

New sources 220726
This new version of ExLight is based on Debian Sid (unstable/development). Build 20726 is a total rebuild of ExLight. The ISO file size is of only 2090 MB, which means that you’ll need about 3GB RAM to run ExLight even faster from RAM. I.e. load to RAM – screenshot. You can remove the DVD or USB stick when ExLight has booted.

KERNEL
ExLight Build 220726 uses Debian’s original kernel 5.18.0-2-amd64.

What’s new in kernel 5.18?

Installed packages
Study all installed packages in ExLight Build 220726.

LOGIN and passwords
After booting up ExLight (built with Refracta) from DVD/USB stick you’ll end up in Enlightenment as the ordinary user user. The password for user is live. The password for root is root. After the installation of ExLight to hard disk you’ll get the chance to create your own ordinary user. When logged in as user you can use Sudo to become root. (Command: sudo su). NOTE: After a hard drive installation of ExLight you can still log in to Enlightenment as root, but you’ll have to create a new password for root. That’s done by running the command sudo passwd root (as the ordinary user user).

VirtualBox and VMware
ExLight Build 220726 runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 4 (failsafe). You can use Calamares Installer also in VirtualBox and VMware without any problems.VirtualBox Guest Additions are pre-installed. Watch a screenshot when ExLight is running in full screen in VirtualBox.

WIRELESS connections
In Build 220726 NetworkManager, WPA supplicant and ConnMan are installed. Use the one you prefer.
NOTE1: Study /etc/resolv.conf-WORKING and change it (if necessary) to suit your needs – screenshot. Keep a copy of resolv.conf-WORKING before you change the filename. Watch a screenshot showing how to use NetworkManager. NOTE2: For WiFi connections you should use NetworkManager logged in as root.

MOVIE about Calamares Installer
Watch a movie about the Calamares installation process in VirtualBox. You can use the Calamares 3.2.6 Installer Framework to install ExLight to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. Watch this animated GIF. (It’s for DebEX Budgie, but works in the same way in ExLight).

Or watch this slideshow.

Spotify
You can easily install Spotify in ExLight (even while running the system live). Just run the command sudo apt update followed by sudo apt install spotify-client.

Important about Refracta
You can use Refracta Snapshot (pre-installed in ExLight) to create your own installable Debian Sid Live System once you have installed ExLight to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta Snapshot it will look like this. You don’t even have to install ExLight to hard drive before you can use the Refracta Snapshot. If you have plenty of RAM you can create a new (your own!) Debian system while running ExLight from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) only will take 10 – 50 min! You’ll find the ISO in /home/snapshot. Or change that by editing /etc/refractasnapshot.conf. NOTE: You may have to run Refracta Snapshot in three steps (1 – 3) before your new ISO is ready.

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian. So is ExLight.

KNOWN ISSUES
After a hard drive installation using Calamares Installer (Not Refracta Installer) you’ll have three “problems”.
1. /etc/apt/sources.list will be different. Replace it with this file.
2. The root password will be gone. Fix it by logging in as the ordinary user user and run the command sudo passwd root.
3. In order to see all icons in the menu you may have to change icons – watch this screenshot.

SCREENSHOTS
1. The Enlightenment 0.25.3 Desktop for user user
2. The Enlightenment 0.25.3 Desktop for root running Refracta Snapshot
3. Running ExLight in full screen in VirtualBox
4. Using NetworkManager for WiFi connections
5. Running ExLight from RAM
6. Refracta Snapshot has started
7. Running Calamares Installer

exlight-logo-blue-textDOWNLOAD
This version has been replaced by version 221130…

 

Read about my Android-x86 Systems – 11, 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 11 (with GAPPS), AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!

 

exton, Exton Linux Distributions

ExLight 64bit UEFI, Build 210125, based on Debian “Bullseye” (upcoming Debian 11) with Enlightenment 0.24.2, Refracta Snapshot, Calamares, Nvidia Graphics Driver and kernel 5.10.10-exton

3 Comments

NEWS 210125 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.24.2 Desktop environment, Refracta Snapshot (create your own Debian Bullseye System), Nvidia Graphics Driver 455.45.01 and Calamares 3.2.35-1 Installer Framework. The very nice Enlightenment theme R-Matrix-2.0 is used. It will be used also after a hard drive installation.

New sources 210125
This new version of ExLight is based on Debian testing 11 Bullseye. Build 210125 is a total rebuild of ExLight. The ISO file size is of only 1440 MB, which means that ExLight now can run even faster from RAM. I.e. load to RAM – screenshot. You can remove the DVD or USB stick when ExLight has booted – watch this screenshot.

KERNEL
ExLight Build 210125 uses kernel 5.10.10-exton, corresponding Kernel.org‘s latest stable kernel 5.10.10.

What’s new in kernel 5.10 LTS? – The most exciting kernel in years!

Installed packages
Study all installed packages in ExLight Build 210125.

LOGIN and passwords
After booting up ExLight (built with Refracta) from DVD/USB stick you’ll end up in Enlightenment as the ordinary user user. The password for user is live. The password for root is root. After the installation of ExLight to hard disk you’ll get the chance to create your own ordinary user. When logged in as user you can use Sudo to become root. (Command: sudo su). NOTE: After a hard drive installation of ExLight you can still log in to Enlightenment as root, but you’ll have to create a new password for root. That’s done by running the command sudo passwd root (as the ordinary user user).

VirtualBox and VMware
ExLight Build 210125 runs very well in VirtualBox and VMware. Maybe you’ll have to use boot alternative 4 (failsafe). You can use Calamares Installer also in VirtualBox and VMware without any problems. 

WIRELESS connections
In Build 210125 NetworkManager, WPA supplicant and ConnMan are installed. Use the one you prefer.
NOTE1: Study /etc/resolv.conf-WORKING and change it (if necessary) to suit your needs – screenshot. Keep a copy of resolv.conf-WORKING before you change the filename. Watch a screenshot showing how to use ConnMan. NOTE2: For WiFi connections you should use ConnMan logged in as user user.

Using the Nvidia proprietary driver
If you want (and can) use Nvidia’s proprietary Graphics Driver 455.45.01 you shall boot up ExLight using boot alternative 3 (fail-safe). Then open up a terminal and run sudo nvidia-xconfig. Log out. NOTE: Maybe you don’t even have to run the command nvidia-xconfig. I.e. your Nvidia card will be used automatically. Check that by starting Nvidia X Server Settings under the Menu >> Preferences. If you can’t reach X/Enlightenment after running nvidia-xconfig etc. your card isn’t supported. Delete xorg.conf with sudo rm /etc/X11/xorg.conf and run the command startx. Or reboot your computer. 

MOVIE about Calamares Installer
Watch a movie about the Calamares installation process in VirtualBox. You can use the Calamares 3.2.35-1 Installer Framework to install ExLight to your computer in any language. You can even use Calamares in VirtualBox and VMware – i.e. non-efi computers. Watch this animated GIF. (It’s for DebEX Budgie, but works in the same way in ExLight).

Or watch this slideshow.

Spotify
You can easily install Spotify in ExLight (even while running the system live). Just run the command sudo apt update followed by sudo apt install spotify-client.

Important about Refracta
You can use the Refracta Snapshot (pre-installed in ExLight) to create your own installable Debian Live System once you have installed ExLight to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta Snapshot it will look like this. You don’t even have to install ExLight to hard drive before you can use the Refracta Snapshot. If you have plenty of RAM you can create a new (your own!) Debian system while running ExLight from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) only will take 10 – 50 min! You’ll find the ISO in /home/snapshot. NOTE: You may have to run Refracta Snapshot in three steps (1 – 3) before your new ISO is ready.

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian. So is ExLight.

KNOWN ISSUES
After a hard drive installation using Calamares Installer (Not Refracta Installer) you’ll have two “problems”.
1. /etc/apt/sources.list will be different. Replace it with this file.
2. The root password will be gone. Fix it by logging in as the ordinary user user and run the command sudo passwd root.

SCREENSHOTS
1. The Enlightenment 0.24.2 Desktop for user user
2. The Enlightenment 0.24.2 Desktop for the ordinary root running Calamares
3. Connection from ExLight to a Windows computer using Samba
4. Using ConnMan for WiFi connections
5. Running ExLight from RAM
6. Refracta Snapshot has started

exlight-logo-blue-textDOWNLOAD
This version of ExLight has been replaced by Build 211130…

Read about my Android-x86 Systems – 10, Pie, Oreo, Nougat, Marshmallow, Lollipop and KitKat at
andex.exton.net – latest is AndEX 10 (with GAPPS) and AndEX Pie 9.0 (also with GAPPS)!
and
about my Android 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 4 and 3/2 at
raspex.exton.se – latest is RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)!